HP MSR2000/3000/4000 Router Series Voice Command Reference

66
Syntax
special-character character number
undo special-character character number
Default
No signal code is configured for a special character.
Views
R2 CAS view
Predefined user roles
network-admin
Parameters
character: Specifies a special character, which can be a pound sign (#), asterisk (*), A, B, C, or D.
number: Specifies a signal code in the range of 11 to 15.
Usage guidelines
R2 signaling in some countries includes special characters such as pound signs (#) and asterisks (*) in
Group I forward signals. To code these special characters, execute the special-character command.
Use different codes for different special characters.
Examples
# Configure signal code 11 for the pound sign (#).
<Sysname> system-view
[Sysname] controller e1 1/0
[Sysname-E1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 1/0] cas 0
[Sysname-cas 1/0:0] special-character # 11
subscriber-line
Use subscriber-line to enter digital voice interface view.
Syntax
subscriber-line line-number:{ ts-set-number | 15 | 23 }
Views
Voice view
Predefined user roles
network-admin
Parameters
line-number: Specifies an E1 or T1 interface by its number.
ts-set-number: Specifies a timeslot set by its number.
15: Number for the PRI set created by bundling the timeslots of an E1 interface.
23: Number for the PRI set created by bundling the timeslots of a T1 interface.