4000 Router Series Voice Command Reference

Parameters

index: Assigns a number to a busy tone type, in the range of 0 to 3. The device can record four types of

busy tones at most.

line-number: Specifies an FXO interface.

Usage guidelines

The busytone-detect auto command takes effect on only FXO interfaces.

After detecting a busy tone type by using the busytone-detect auto command, the device automatically

calculates the busy tone parameters, executes the busytone-detect custom command to record the busy

tone parameters, and executes the area custom command to validate these busy tone parameters.

Examples

# Enable automatic busy tone detection on FXO interface 2/0, and assign number 0 to the detected busy

tone parameters.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] busytone-detect auto 0 2/0

Related commands

• area custom

• busytone-detect custom

busytone-detect custom

Use busytone-detect custom to configure busy tone parameters.

Use undo busytone-detect custom to delete busy tone parameters.

Syntax

busytone-detect custom area-number index argu f1 f2 p1 p2 p3 p4 p5 p6 p7

undo busytone-detect custom index

Default

Busy tone parameters depend on the area command.

Views

Voice view

Predefined user roles

network-admin

Parameters

area-number: Specifies an area number. This argument is reserved for future use and has a fixed value

of 2.

index: Assigns a number to a busy tone type, in the range of 0 to 3. The device can record four types of

busy tones at most.

argu: This argument is reserved for future use and has a value range of 0 to 32767.

f1: Frequency 1 in Hz, in the range of 50 to 3600.

f2: Frequency 2 in Hz, in the range of 50 to 3600.