HP MSR2000/3000/4000 Router Series Voice Command Reference

75
Voice entity commands
codec
Use codec to configure a codec for a voice entity.
Use undo codec to delete the configured codec.
Syntax
codec { g711alaw | g711ulaw | g723r53 | g723r63 | g726r16 | g726r24 | g726r32 | g726r40 |
g729a | g729br8 | g729r8 } [ bytes payload-size ]
undo codec
Default
No codecs are configured.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
mdc-admin
Parameters
g711alaw: Specifies the G711 A-Law codec at 64 kbps, which is typically used in Europe.
g711ulaw: Specifies the G711 u-Law codec at 64 kbps, which is typically used in North America and
Japan.
g723r53: Specifies the G723.1 Annex A codec at 5.3 kbps.
g723r63: Specifies the G723.1 Annex A codec at 6.3 kbps.
g726r16: Specifies the G726 Annex A codec at 16 kbps. Support for this keyword depends on the line
card.
g726r24: Specifies the G726 Annex A codec at 24 kbps. Support for this keyword depends on the line
card.
g726r32: Specifies the G726 Annex A codec at 32 kbps. Support for this keyword depends on the line
card.
g726r40: Specifies the G726 Annex A codec at 40 kbps. Support for this keyword depends on the line
card.
g729a: Specifies the G729 Annex A codec (a simplified version of G.729) at 8 kbps.
g729br8: Specifies the G729 Annex B codec at 8 kbps.
g729br8: Specifies the G729 codec at 8 kbps.
bytes payload-size: Specifies the number of bytes sent per second. Table 6 sh
ows the value range and
default value of payload-size for the codecs.