4000 Router Series Voice Command Reference

outband nte

Use outband nte to configure out-of-band NTE DTMF transmission.

Use undo outband to restore the default.

Syntax

outband nte

undo outband

Default

Inband DTMF transmission is adopted.

Views

POTS entity view, VoIP entity view,

Predefined user roles

network-admin

mdc-admin

Usage guidelines

HP recommends that you configure the outband nte command and the same payload type value on the

originating and terminating devices. Otherwise, DTMF tones might fail to be transmitted.

Examples

# Configure out-of-band NTE DTMF transmission.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] entity 10 voip

[Sysname-voice-dial-entity10] outband nte

Related commands

rtp payload-type nte

Use rtp payload-type nte to configure the payload type field in RTP packets for out-of-band NTE DTMF

transmission.

Use undo rtp payload-type nte to restore the default.

Syntax

rtp payload-type nte value

undo rtp payload-type nte

Default

The payload type field in RTP packets is set to 101.

Views

POTS entity view, VoIP entity view