HP MSR2000/3000/4000 Router Series Voice Command Reference

92
Dial program commands
caller-group
Use caller-group to configure a voice entity to permit or deny the calling numbers in a subscriber group.
Use undo caller-group to remove the configuration.
Syntax
caller-group { deny | permit } group-id
undo caller-group { { deny | permit } group-id | all }
Default
A voice entity permits all calling numbers.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
Parameters
deny: Denies the calling numbers in the subscriber group.
permit: Permits the calling numbers in the subscriber group.
group-id: Specifies a subscriber group by its ID in the range of 1 to 2147483647.
all: Removes all subscriber groups.
Examples
# Configure VoIP entity 1 to permit the calling numbers in subscriber group 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 1 voip
[Sysname-voice-dial-entity1] caller-group permit 1
Related commands
subscriber-group
caller-permit
Use caller-permit to configure a voice entity to permit one or more calling numbers.
Use undo caller-permit to remove the configuration.
Syntax
caller-permit calling-string
undo caller-permit { calling-string | all }