HP MSR2000/3000/4000 Router Series Voice Configuration Guide

85
Task Command
Display SIP UA registration status. display voice sip register-status
Configuring the call destination address for a VoIP
entity
You can configure the call destination address for a VoIP entity in one of the following ways:
• Configure the call destination IP address.
• Configure the VoIP entity to obtain the call destination address from a proxy server.
• Configure the destination domain name and port number. Only DNS A records are supported. For
more information about DNS, see Layer 3—IP Services Configuration Guide.
Configuring the call destination IP address for a VoIP entity
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter VoIP entity view.
entity entity-number voip N/A
5. Configure the call destination
IP address.
address sip ip ip-address [ port
port-number ]
By default, no call destination
address is configured.
Configuring a VoIP entity to obtain the call destination address
from a proxy server
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP view.
sip N/A
4. Specify the proxy server.
proxy { dns domain-name port
port-number | ip ip-address [ port
port-number ] }
By default, no proxy server is
specified.
The port number must be 5060 for
the domain name.
5. Return to voice view.
quit N/A
6. Enter dial program view.
dial-program N/A
7. Enter VoIP entity view.
entity entity-number voip N/A