4000 Router Series Voice Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

100

Ste

Command

Remarks

4. Configure a PSTN cause

code-to-SIP status

mapping.

set pstn-cause pstn-cause

sip-status sip-status

For information about default PSTN cause

code-to-SIP status mappings, see Voice

Command Reference.

5. Configure a SIP

status-to-PSTN cause

mapping.

set sip-status sip-status

pstn-cause pstn-cause

For information about default SIP

status-to-PSTN cause mappings, see

Voice Command Reference.

6. Display PSTN cause-to-SIP

status mappings.

display voice sip map { pstn-sip

| sip-pstn }

N/A

Configuring caller privacy

SIP uses the following header fields to provide caller privacy:

• Privacy—If the Privacy header field carries "Privacy: none", the caller ID is displayed. If the Privacy

header field carries "Privacy: id", the caller ID is hidden.

• Remote-Party-ID—If the Remote-Party-ID header field carries "privacy=off", the caller ID is

displayed. If the Remote-Party-ID header field carries "privacy=full", the caller ID is hidden. If the

Remote-Party-ID header field is set, the device adds this field to an INVITE request. A device that

receives the INVITE request preferably obtains caller information from this field regardless of

whether the local Remote-Party-ID header field is set.

NOTE:

The Remote-Party-ID header field cannot coexist with the P-Preferred-Identity or P-Asserted-Identity

header field.

To configure caller privacy:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter voice view.

voice-setup N/A

3. Enter SIP view.

sip N/A

4. Add the Privacy header field

into INVITE requests.

privacy

By default, INVITE requests do not

carry the Privacy header field.

5. Add the Remote-Party-ID

header field into INVITE

requests.

remote-party-id

By default, INVITE requests do not

carry the Remote-Party-ID header

field.

Setting the P-Asserted-Identity or P-Preferred-Identity header

field

Any two of the P-Asserted-Identity, P-Preferred-Identity, and Remote-Party-ID header fields cannot coexist.

To set the P-Asserted-Identity or P-Preferred-Identity header field: