HP MSR3000 Router Series Installation Guide

14
Figure 11 Rack-mounting clearances for the MSR3044/3064
Table 6 Rack-mounting clearance requirements
Model Router dimensions
Rack clearance re
q
uirements
3012/3024
• Width—440 mm (17.32 in)
• Height—44.2 mm (1.74 in) (1 RU)
• Total depth—608 mm (23.94 in)
{ 483 mm (19.02 in) for the chassis
{ 65 mm (2.56 in) for connecting an RPS
power cord at the front of the chassis
{ 60 mm (2.36 in) for connecting an E1
cable at the rear of the chassis
The rack must meet all the following
requirements:
• At least 80 mm (3.15 in) between the front
rack post and the front door.
• At least 550 mm (21.65 in) between the
front rack post and the rear door.
• 290 mm (11.42 in) to 430 mm (16.93 in)
between the front and rear rack posts,
with a clearance of 160 mm (6.30 in)
between the rear rack post and the rear
door, or 450 mm (17.72 in) to 610 mm
(24.02 in) between the front and rear rack
posts.
480mm
E1 cable
60mm
Front mounting
bracket
Power cord
60mm