HP MSR3000 Router Series Installation Guide

30
connector at one end of another fiber cable into the Tx port of the router and the LC connector at
the other end to the Rx port of the peer device.
5. Examine the Ethernet port LED after connection. For more information, see "Appendix B LEDs."
Figure 34 Connecting an optical fiber
Installing a CF card
1. Open the CF card cover by pressing the spring clip.
2. Push the CF card eject button all the way into the slot, and make sure the button does not project
from the panel.
3. Insert the CF card into the slot following the direction shown in Figure 35, and
make sure it does
not project from the slot.
4. Close the CF card cover.
Figure 35 Installing a CF card