HP MSR3000 Router Series Installation Guide

38
Figure 48 Installing a PoE power supply
Connecting the power cord
The power cords in the figures of this section are only for illustration.
Connecting an AC power cord
1. Make sure the router is well grounded, and the power switch on the router is in the OFF position.
2. Connect one end of the AC power cord to the AC receptacle on the router, and use a cable tie to
secure the power cord.
3. Connect the other end of the power cord to the AC power source.
Figure 49 Connecting an AC power cord to an MSR3012/3024 router