HP MSR3000 Router Series Installation Guide

Preparing for installation

The HP MSR3000 Router Series includes the models in Table 1.

Table 1 HP MSR2000 Router Series models

Router model Product code

HP descri

tion

RMN

MSR3064 JG404A HP MSR3064 Router

BJNGA-BB0006

MSR3044 JG405A HP MSR3044 Router

BJNGA-BB0011

MSR3024 JG406A HP MSR3024 AC Router

BJNGA-BB0007

MSR3024 JG407A HP MSR3024 DC Router

BJNGA-BB0007

MSR3024 JG408A HP MSR3024 PoE Router

BJNGA-BB0007

MSR3012 JG409A HP MSR3012 AC Router

BJNGA-BB0008

MSR3012 JG410A HP MSR3012 DC Router

BJNGA-BB0008

IMPORTANT:

For regulatory identification purposes, every MSR3000 router is assigned a regulatory model number

(RMN). These regulatory model numbers should not be confused with the marketing name HP MSR30X

or the product codes.

Safety recommendations

Safety symbols

When reading this document, note the following symbols:

WARNING means an alert that calls attention to important information that if not understood or

followed can result in personal injury.

CAUTION means an alert that calls attention to important information that if not understood or

followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

• Keep the chassis and installation tools away from walk areas.

• Make sure the ground is dry and flat and anti-slip measures are in place.

• Unplug all the external cables (including power cords) before moving the chassis.

Electricity safety

• Locate the emergency power-off switch in the room before installation. Shut the power off at once in

case accident occurs. Disconnect the power cord of the router if necessary.

• Make sure the router is correctly grounded.