Manualshelf

HP MSR3000 Router Series Installation Guide

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router
61626364656667686970
56
Figure 77 Installing filler panels
Replacing an HMIM
W
ARNING!
You can replace an HMIM when the router is powered on. However, before replacin
g
an HMIM when the
router is powered on, you must execute the remove hmimslot
slotnumber
command.
1. Completely loosen the captive screws of the HMIM.
2. Gently pull the HMIM out of the slot along the slide rails.
3. Install a new HMIM. For the installation procedure, see "Installing the router."
If you do not install a new HMIM, install a filler panel and tighten the screws.
Figure 78 Pulling the HMIM out of the slot