Supplied mounting brackets and the installation modes depend on your device model. Install front mounting brackets and the load-bearing screws for rear mounting brackets. MSR3044 MSR3012/3024 MSR3064 Mount the router to the rack. Router depth smaller than rack depth. Router depth greater than rack depth Exchange left and right rear mounting brackets.
Filler module PoE power module If you remove the filler module next to the PWR1 slot, you can install a PoE power module. Connecting the Power Cable Before connecting the power cable, make sure the router is properly grounded. Make sure the power switch is off and connect the power cable to the router first and then to the equipment-room power supply system to avoid bodily injury. The power cord in the figure is only for illustration.
To find related documents, browse to the Manuals page of the HP Business Support Center website: Connect the AC power cable http://www.hp.com/support/manuals Connect the DC power cable © Copyright 2013 Hewlett-Packard Development Company, L.P. 7 The information contained herein is subject to change without notice.
