R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

98
[Sysname] traffic behavior test
[Sysname-behavior-test] queue wfq queue-number 16
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier default-class behavior test
Related commands
• display qos queue cbq interface
• traffic behavior
queue-length
Use queue-length to configure the maximum queue length and use tail drop.
Use undo queue-length to delete the configuration.
Syntax
queue-length queue-length
undo queue-length queue-length
Default
Tail drop is used, and the queue length is 64.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
queue-length: Specifies the maximum queue length in the range of 1 to 1024.
Usage guidelines
Before configuring this command, make sure the queue af command or the queue wfq command has
been configured.
The undo queue af or undo queue wfq command deletes the queue length configured by using the
queue-length command.
Examples
# Configure a maximum queue length of 16 and specify tail drop for AF.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] queue af bandwidth 200
[Sysname-behavior-database] queue-length 16
Related commands
• queue af
• queue wfq
wred
Use wred to enable WRED.