R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

103
Congestion avoidance commands
WRED commands
display qos wred interface
Use display qos wred interface to display the WRED configuration and statistics for an interface or PVC.
Syntax
display qos wred interface [ interface-type interface-number [ pvc { pvc-name | vpi/vci } ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the WRED configuration and statistics for all the interfaces.
pvc { pvc-name | vpi/vci }: Specifies a PVC by its name or VPI/VCI value. You can specify a PVC only
for an ATM interface. When you specify an ATM interface but do not specify a PVC, the command
displays the WRED configuration and statistics for all PVCs on the ATM interface.
Examples
# Display the WRED configuration and statistics for GigabitEthernet 2/1/0.
<Sysname> display qos wred interface
Interface: GigabitEthernet2/1/0
Current WRED configuration:
Exponent: 9 (1/512)
Pre Low High Dis-prob Random-discard Tail-discard
------------------------------------------------------
0 10 30 10 0 0
1 10 30 10 0 0
2 10 30 10 0 0
3 10 30 10 0 0
4 10 30 10 0 0
5 10 30 10 0 0
6 10 30 10 0 0
7 10 30 10 0 0
Table 33 Command output
Field Descri
p
tion
Interface Interface type and interface number.