R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

107
Predefined user roles
network-admin
Parameters
exponent: Specifies the exponent for average queue length calculation, in the range of 1 to 16.
Usage guidelines
Before configuring this command, enable WRED on the interface or PVC with the qos wred enable
command.
Examples
# Set the exponent for the average queue size calculation to 6 on GigabitEthernet 2/1/0.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/0
[Sysname-GigabitEthernet2/1/0] qos wfq queue-length 100 queue-number 512
[Sysname-GigabitEthernet2/1/0] qos wred enable
[Sysname-GigabitEthernet2/1/0] qos wred weighting-constant 6
Related commands
• display qos wred interface
• qos wred enable