R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

7
display packet-filter
NOTE:
Support for this command depends on the device model.
Use display packet-filter to display ACL application information for packet filtering.
Syntax
MSR2000/MSR3000:
display packet-filter { interface [ interface-type interface-number ] [ inbound | outbound ] | interzone
[ source source-zone-name destination destination-zone-name ] }
MSR4000:
display packet-filter { interface [ interface-type interface-number ] [ inbound | outbound ] | interzone
[ source source-zone-name destination destination-zone-name ] [ slot slot-number ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If you do not
specify any interface, the command displays ACL application information on all interfaces for packet
filtering. (MSR2000/MSR3000.)
interface [ interface-type interface-number ]: Specifies an interface by its type and number. VLAN
interfaces are not supported. If you do not specify any interface, the command displays ACL application
information on all interfaces except VLAN interfaces for packet filtering. (MSR4000.)
interzone [ source source-zone-name destination destination-zone-name ]: Specifies an interzone
instance. The source-zone-name argument specifies a source zone by its name. The
destination-zone-name argument specifies a destination zone by its name. A zone name is a
case-insensitive string of 1 to 31 characters.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
slot slot-number: Specifies a card by its slot number. If you do not specify any card, the command
displays ACL application information on the MPU for packet filtering. (MSR4000.)
Usage guidelines
If neither the inbound keyword nor the outbound keyword is specified, this command displays the ACL
application information for packet filtering on both directions of interfaces.
If no source and destination zones are specified, this command displays ACL application information
about all interzone instances.
Examples
# Display ACL application information for incoming packet filtering on interface GigabitEthernet 2/1/0.
<Sysname> display packet-filter interface gigabitethernet 2/1/0 inbound