R0106-HP MSR Router Series ACL and QoS Command Reference(V7)
27
Examples
# Create a rule in IPv4 basic ACL 2000 to deny the packets from any source IP segment but 10.0.0.0/8,
172.17.0.0/16, or 192.168.1.0/24.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.0.0.0 0.255.255.255
[Sysname-acl-basic-2000] rule permit source 172.17.0.0 0.0.255.255
[Sysname-acl-basic-2000] rule permit source 192.168.1.0 0.0.0.255
[Sysname-acl-basic-2000] rule deny source any
Related commands
• acl
• acl logging interval
• display acl
• step
• time-range
rule (IPv6 advanced ACL view)
Use rule to create or edit an IPv6 advanced ACL rule.
Use undo rule to delete an entire IPv6 advanced ACL rule or some attributes in the rule.
Syntax
rule [ rule-id ] { deny | permit } protocol [ { { ack ack-value | fin fin-value | psh psh-value | rst rst-value
| syn syn-value | urg urg-value } * | established } | counting | destination { dest-address dest-prefix |
dest-address/dest-prefix | any } | destination-port operator port1 [ port2 ] | dscp dscp | flow-label
flow-label-value | fragment | icmp6-type { icmp6-type icmp6-code | icmp6-message } | logging |
routing [ type routing-type ] | hop-by-hop [ type hop-type ] | source { source-address source-prefix |
source-address/source-prefix | any } | so
urce-port operator port1 [ port2 ] | time-range
time-range-name | vpn-instance vpn-instance-name ] *
undo rule rule-id [ { { ack | fin | psh | rst | syn | urg } * | established } | counting | destination |
destination-port | dscp | flow-label | fragment | icmp6-type | logging | routing | hop-by-hop |
source | source-port | time-range | vpn-instance ] *
Default
An IPv6 advanced ACL does not contain any rule.
Views
IPv6 advanced ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule ID in the range of 0 to 65534. If you do not specify a rule ID when creating an
ACL rule, the system automatically assigns it a rule ID. This rule ID is the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.