R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

39
O
p
tion Descri
p
tion
local-precedence
local-precedence-value&<1-8>
Matches local precedence values.
The local-precedence-value&<1-8> argument is a list of local precedence
values. A local precedence ranges from 0 to 7. &<1-8> indicates that you
can enter up to eight local precedence values.
mpls-exp exp-value&<1-8>
Matches MPLS EXP values.
The exp-value&<1-8> argument is a list of EXP values. An EXP value ranges
from 0 to 7. &<1-8> indicates that you can enter up to eight EXP values.
packet-length { min min-value |
max max-value } *
Matches the packet length.
The min-value argument specifies the minimum packet length in bytes, and
the max-value argument specifies the maximum packet length in bytes.
protocol protocol-name
Matches a protocol.
The protocol-name argument can be ARP, IP, or IPv6.
qos-local-id local-id-value Matches a local QoS ID, which is in the range of 1 to 4095.
rtp start-port start-port-number
end-port end-port-number
Matches RTP protocol ports.
The start-port-number argument specifies the start RTP port number and is in
the range of 2000 to 65535. The end-port-number argument specifies the
end RTP port number and is in the range of 2000 to 65535.
source-mac mac-address Matches a source MAC address.
Table 16 Available system-defined control plane protocols
Protocol Descri
p
tion
default Protocol packets other than the following packet types
arp ARP packets
arp-snooping ARP snooping packets
bfd BFD packets
bgp BGP packets
bgp4+ IPv6 BGP packets
bpdu-tunnel BPDU tunnel packets
cdp CDP packets
cfd CFD packets
dhcp DHCP packets
dhcp-snooping DHCP snooping packets
dhcpv6 IPv6 DHCP packets
dldp DLDP packets
dot1x 802.1X packets
ftp FTP packets
gmrp GMRP packets
hoplimit-expires Hop-limit expire packets
http HTTP packets