R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

46
Predefined user roles
network-admin
Parameters
classifier-name: Specifies the name of the traffic class, a case-sensitive string of 1 to 31 characters.
operator: Sets the operator to logic AND (the default) or OR for the traffic class.
and: Specifies the logic AND operator. The traffic class matches the packets that match all its criteria.
or: Specifies the logic OR operator. The traffic class matches the packets that match any of its criteria.
Examples
# Create a traffic class class1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
Related commands
display traffic classifier
Traffic behavior commands
car
Use car to configure a CAR action in a traffic behavior.
Use undo car to delete a CAR action from a traffic behavior.
Syntax
car cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ pir
peak-information-rate ] [ green action | red action | yellow action ] *
undo car
Default
No CAR action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
cir committed-information-rate: Specifies the committed information rate (CIR) in the range of 8 to
10000000 kbps. The CIR is an average traffic rate.
cbs committed-burst-size: Specifies the committed burst size (CBS) in the range of 1000 to 1000000000
bytes. The default is the amount of traffic transmitted at the rate of CIR over 500 milliseconds.
ebs excess-burst-size: Specifies the excess burst size (EBS) in the range of 0 to 1000000000 bytes. The
default is 0.