R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

54
Default
No traffic redirecting action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Redirects traffic to an interface specified by its type and
number.
vlan vlan-id: Tags traffic redirected to an interface with the VLAN tag specified by vlan-id in the range of
1 to 4094.
Usage guidelines
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000
Yes on MSR3000 routers installed with
HMIM-24GSW cards
MSR4000
Yes on MSR4000 routers installed with
HMIM-24GSW cards
Examples
# Configure redirecting traffic to GigabitEthernet 2/1/0 in the traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface gigabitethernet 2/1/0
Related commands
• classifier behavior
• qos policy
• traffic behavior
remark dot1p
Use remark dot1p to configure an 802.1p priority marking action.
Use undo remark dot1p to delete the action.
Syntax
remark dot1p dot1p-value
undo remark dot1p
Default
No 802.1p priority marking action is configured.