R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

62
[Sysname-cp-management]
display qos policy
Use display qos policy to display the configuration of QoS policies.
Syntax
MSR2000/MSR3000:
display qos policy { system-defined | user-defined } [ policy-name [ classifier classifier-name ] ]
MSR4000:
display qos policy { system-defined | user-defined } [ policy-name [ classifier classifier-name ] ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
system-defined: Displays system-defined QoS policies.
user-defined: Displays user-defined QoS policies.
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters. If no QoS
policy is specified, this command displays configuration information of all the user-defined QoS policies.
classifier classifier-name: Specifies a traffic class by its name, a case-sensitive string of 1 to 31 characters.
If no traffic class is specified, this command displays information about all traffic classes.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays the
QoS policies on the active MPU. (MSR4000.)
Examples
# Display the configuration of all user-defined QoS policies.
<Sysname> display qos policy user-defined
User-defined QoS policy information:
Policy: 1 (ID 100)
Classifier: 1 (ID 100)
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 7000 (Bytes), EBS 512 (Bytes)
Green action : pass
Yellow action : pass
Red action : discard
Classifier: 2 (ID 101)
Behavior: 2