R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

78
Syntax
qos map-table { dot1p-lp | dscp-lp }
Views
System view
Predefined user roles
network-admin
Parameters
For the description of the keywords, see Table 24.
Examples
# Enter the 802.1p-local priority map view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-in-dot1p-lp]
Related commands
• display qos map-table
• import
Port priority commands
qos priority
Use qos priority to change the port priority of an interface.
Use undo qos priority to restore the default.
Syntax
qos priority priority-value
undo qos priority
Default
The port priority is 0.
Views
Interface view
Predefined user roles
network-admin
Parameters
priority-value: Specifies the port priority value in the range of 0 to 7.
Examples
# Set the port priority of interface GigabitEthernet 2/1/0 to 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/0
[Sysname-GigabitEthernet2/1/0] qos priority 2