R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

80
Default
The port priority is trusted.
Views
Interface view
Predefined user roles
network-admin
Parameters
dot1p: Uses the 802.1p priority in incoming packets for priority mapping.
dscp: Uses the DSCP value in incoming packets for priority mapping.
Usage guidelines
This command is supported only on routers installed with Layer 2 switching modules.
Examples
# Set the trusted packet priority type to 802.1p priority on GigabitEthernet 2/1/0.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/0
[Sysname-GigabitEthernet2/1/0] qos trust dot1p
Related commands
display qos trust interface