R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

31
• The R&D department connects to GigabitEthernet 2/1/1 of the router, which sets the 802.1p
priority of traffic from the R&D department to 4.
• The management department connects to Ethernet 2/1/2 of the router, which sets the 802.1p
priority of traffic from the management department to 5.
Configure port priority, 802.1p-to-local mapping table, and priority marking to implement the plan as
described in Table 2.
Table 2 Configuration plan
Traffic
destination
Traffic priority
order
Queuin
g
p
lan
Traffic source Out
p
ut
q
ueue Queue
p
riorit
y
Public servers
R&D department >
management
department > marketing
department
R&D department 6 High
Management
department
4 Medium
Marketing department 2 Low
Internet
Management
department > marketing
department > R&D
department
R&D department 2 Low
Management
department
6 High
Marketing department 3 Medium
Figure 6 Network diagram
Configuration procedure
1. Configure trusting port priority:
Host
Server
R&D Dept
Internet
Router
GE2/1/
0
G
E2
/1/1
GE2/1
/2
GE2/1/3
Marketing Dept
Host
Server
Host
Server
Management Dept
Public servers
Data server
Mail server