R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)
37
Ste
p
Command
Remarks
5. Create a traffic
behavior and enter
traffic behavior view.
traffic behavior behavior-name
By default, no traffic behavior is
configured.
6. Configure a traffic
policing action.
car cir committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action |
red action | yellow action ] *
By default, no traffic policing action is
configured.
7. Return to system view.
quit N/A
8. Create a QoS policy
and enter QoS policy
view.
qos policy policy-name
By default, no QoS policy is
configured.
9. Associate the traffic
class with the traffic
behavior in the QoS
policy.
classifier classifier-name behavior
behavior-name
By default, a traffic class is not
associated with a traffic behavior.
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an
interface or PVC
• Applying the QoS policy to the
control plane
• Applying the QoS policy to the
management interface control
plane
Choose one of the application
destinations as needed.
By default, no QoS policy is applied.
12. (Optional.) Display
traffic policing
configuration.
display qos policy user-defined
[ policy-name ]
Available in any view.
Configuring traffic policing by using the non-MQC approach
Configuring CAR-list-based traffic policing
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Configure a CAR list.
qos carl carl-index { dscp dscp-list | mac
mac-address | mpls-exp mpls-exp-value |
precedence precedence-value |
{ destination-ip-address |
source-ip-address } { range start-ip-address to
end-ip-address | subnet ip-address
mask-length } [ per-address
[ shared-bandwidth ] ] }
By default, no CAR list is
configured.
3. Enter interface view.
interface interface-type interface-number N/A
4. Configure a
CAR-list-based CAR
policy on the interface.
qos car { inbound | outbound } carl
carl-index cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ]
[ pir peak-information-rate ] [ green action |
red action | yellow action ] *
By default, no CAR policy is
configured.