R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

39
Ste
p
Command Remarks
6. Configure a GTS action.
• In absolute value:
gts cir committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ queue-length
queue-length ]
• In percentage:
gts percent cir cir-percent [ cbs cbs-time
[ ebs ebs-time ] ] [ queue-length
queue-length ]
By default, no GTS action is
configured.
7. Return to system view.
quit N/A
8. Create a QoS policy
and enter policy view.
qos policy policy-name
By default, no QoS policy is
created.
9. Associate the class with
the traffic behavior in the
QoS policy.
classifier classifier-name behavior
behavior-name
By default, a traffic class is not
associated with a traffic
behavior.
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an interface or
PVC
• Applying the QoS policy to the control
plane
By default, a QoS policy is not
applied.
Choose one of the application
destinations as needed.
12. (Optional.) Display
traffic behavior
configuration.
display qos policy user-defined
[ policy-name ]
Available in any view.
Configuring GTS by using the non-MQC approach
You can configure the following types of GTS when using the non-MQC approach:
• ACL-based GTS—Configures GTS parameters for traffic matching a specific ACL. By specifying
multiple ACLs, you can set GTS parameters for traffic of different traffic classes.
• GTS for all traffic—Configures GTS parameters for all traffic.
Configuring ACL-based GTS
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Configure ACL-based
GTS on the interface.
qos gts acl [ ipv6 ] acl-number cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ queue-length
queue-length ]
By default, GTS is not configured
on an interface.
Configuring GTS for all traffic
Ste
p
Command Remarks
1. Enter system view.
system-view N/A