R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

64
Configuring traffic filtering
You can filter in or filter out traffic of a class by associating the class with a traffic filtering action. For
example, you can filter packets sourced from a specific IP address according to network status.
Configuration procedure
To configure traffic filtering:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic class and
enter traffic class view.
traffic classifier classifier-name [ operator
{ and | or } ]
By default, no traffic class is
configured.
3. Configure match criteria.
if-match [ not ] match-criteria
By default, no match criterion
is configured.
4. Return to system view.
quit N/A
5. Create a traffic behavior
and enter traffic behavior
view.
traffic behavior behavior-name
By default, no traffic behavior
is configured.
6. Configure the traffic filtering
action.
filter { deny | permit }
By default, no traffic filtering
action is configured.
7. Return to system view.
quit N/A
8. Create a QoS policy and
enter QoS policy view.
qos policy policy-name
By default, no QoS policy is
configured.
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
classifier classifier-name behavior
behavior-name
By default, a traffic class is not
associated with a traffic
behavior.
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an
interface or PVC
• Applying the QoS policy to the control
plane
Choose one of the application
destinations as needed.
By default, no QoS policy is
applied.
12. (Optional.) Display the
traffic filtering
configuration.
display qos policy user-defined
[ policy-name ]
Available in any view.