R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

67
Ste
p
Command Remarks
8. Create a QoS policy and
enter QoS policy view.
qos policy policy-name
By default, no QoS policy
is configured.
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
classifier classifier-name behavior
behavior-name
By default, a traffic class
is not associated with a
traffic behavior.
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an interface or
PVC
• Applying the QoS policy to the control
plane
Choose one of the
application destinations
as needed.
By default, no QoS policy
is applied.
12. (Optional.) Display the
priority marking
configuration.
display qos policy user-defined [ policy-name ] Available in any view.
Configuration example
Network requirements
As shown in Figure 20, configure priority marking on the router to meet the following requirements:
Traffic source Destination Processin
g
p
riorit
y
Host A, B Data server High
Host A, B Mail server Medium
Host A, B File server Low
Figure 20 Network diagram
Configuration procedure
# Create advanced ACL 3000, and configure a rule to match packets with destination IP address
192.168.0.1.