R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

70
Configuring traffic redirecting
Traffic redirecting redirects packets matching the specified match criteria to a location for processing.
The router supports redirecting traffic to an interface.
The following matrix shows the feature and hardware compatibility:
Hardware Traffic redirectin
g
feature com
p
atibilit
y
MSR2000 No
MSR3000 Yes on HMIM-24GSW interface modules
MSR4000 Yes on HMIM-24GSW interface modules
Configuration procedure
To configure traffic redirecting:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a traffic class and
enter traffic class view.
traffic classifier classifier-name [ operator { and
| or } ]
By default, no traffic class
exists.
3. Configure match criteria.
if-match [ not ] match-criteria
By default, no match
criterion is configured for
a traffic class.
For more information
about the match criteria,
see the if-match
command in ACL and
QoS Command
Reference.
4. Return to system view.
quit N/A
5. Create a traffic behavior
and enter traffic behavior
view.
traffic behavior behavior-name
By default, no traffic
behavior exists.
6. Configure a traffic
redirecting action.
redirect interface interface-type
interface-number
By default, no traffic
redirecting action is
configured for a traffic
behavior.
7. Return to system view.
quit N/A
8. Create a QoS policy and
enter QoS policy view.
qos policy policy-name
By default, no QoS policy
exists.