R0106-HP MSR Router Series ACL and QoS Configuration Guide(V7)

[RouterB-vpn-instance-vpn1] vpn-target 200:1 import-extcommunity

[RouterB-vpn-instance-vpn1] quit

# Configure a BGP connection.

[RouterB] router id 1.1.1.1

[RouterB] bgp 200

[RouterB-bgp] peer 2.2.2.2 as-number 200

[RouterB-bgp] peer 2.2.2.2 connect-interface loopback 0

[RouterB-bgp] ip vpn-instance vpn1

[RouterB-bgp-vpn1] peer 167.1.1.1 as-number 100

[RouterB-bgp-vpn1] address-family ipv4

[RouterB-bgp-ipv4-vpn1] peer 167.1.1.1 enable

[RouterB-bgp-ipv4-vpn1] quit

[RouterB-bgp] address-family vpnv4

[RouterB-bgp-vpnv4] peer 2.2.2.2 enable

[RouterB-bgp-vpnv4] quit

[RouterB-bgp] quit

# Configure MPLS.

[RouterB] mpls lsr-id 1.1.1.1

[RouterB] mpls ldp

[RouterB-mpls-ldp] quit

# Configure OSPF.

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0

[RouterB-ospf-1-area-0.0.0.0] network 168.1.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] quit

# Bind interface GigabitEthernet 2/1/0 to the VPN instance vpn1.

[RouterB] interface gigabitethernet 2/1/0

[RouterB-GigabitEthernet2/1/0] ip binding vpn-instance vpn1

[RouterB-GigabitEthernet2/1/0] ip address 167.1.1.2 24

[RouterB-GigabitEthernet2/1/0] quit

# Enable MPLS on interface GigabitEthernet 2/1/1.

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] mpls enable

[RouterB-GigabitEthernet2/1/1] mpls ldp enable

[RouterB-GigabitEthernet2/1/1] quit

4. Configure Router C:

# Configure a VPN instance.

<RouterC> system-view

[RouterC] ip vpn-instance vpn1

[RouterC-vpn-instance-vpn1] route-distinguisher 200:1

[RouterC-vpn-instance-vpn1] vpn-target 200:1 export-extcommunity

[RouterC-vpn-instance-vpn1] vpn-target 200:1 import-extcommunity

[RouterC-vpn-instance-vpn1] quit

# Configure a BGP connection.

[RouterC] router id 2.2.2.2