R0106-HP MSR Router Series Fundamentals Command Reference(V7)

9: Untagged ports:

10: GigabitEthernet2/1/0

# Display the first line that begins with "user-group" in the running configuration and all of the following

lines.

<Sysname> display current-configuration | by-linenum begin user-group

114: user-group system

115- #

116- return

display >

Use display > to save the output from a display command to a separate file.

Syntax

display command > filename

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

command: Specifies the keywords and arguments of a display command. To display available keywords

and arguments, enter display ?.

filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.

Usage guidelines

The display commands show the configuration, statistics, and states of the device. You can use the

display > command to save the output to a file.

If the specified file does not exist, the system creates the file and saves the output to the file. If the file

already exists, the system overwrites the file.

Examples

# Save VLAN 1 settings to a separate file named vlan.txt.

<Sysname> display vlan 1 > vlan.txt

# Verify the content of the vlan.txt file.

<Sysname> more vlan.txt

VLAN ID: 1

VLAN type: Static

Route interface: Not configured

Description: VLAN 0001

Name: VLAN 0001

Tagged ports: None

Untagged ports:

GigabitEthernet2/1/0