R0106-HP MSR Router Series Fundamentals Command Reference(V7)

160
Next main startup saved-configuration file: cfa0:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 20 Command output
Field Description
MainBoard Displays the startup configuration files on the active MPU.
Current Startup saved-configuration file Configuration file that the active MPU has started up with.
Next main startup saved-configuration file Primary startup configuration file to be used at the next startup.
Next backup startup saved-configuration file Backup startup configuration file to be used at the next startup.
Slot n Displays the startup configuration files on the MPU in slot n.
Related commands
startup saved-configuration
display this
Use display this to display the running configuration in the current view.
Syntax
display this
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
This command does not display parameters that are using the default settings.
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
This command can be executed in any user interface view to display the running configuration of all user
view interfaces.
Examples
# Display the running configuration on interface GigabitEthernet2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] display this
#
interface GigabitEthernet2/1/1
port link-mode route
#
return