R0106-HP MSR Router Series Fundamentals Command Reference(V7)

166
undo startup saved-configuration
Default
No next-startup configuration file is specified.
Views
User view
Predefined user roles
network-admin
Parameters
cfgfile: Specifies the name of a .cfg file. This .cfg file must already exist in the root directory of storage
medium.
backup: Specifies the configuration file as the backup next-startup configuration file.
main: Specifies the configuration file as the main next-startup configuration file. This is the primary
configuration file that the device attempts to load at startup. If the loading attempt fails, the device tries
the backup next-startup configuration file.
Usage guidelines
On the MSR4000 router, the startup saved-configuration command applies to both MPUs. To
successfully configure the command, verify that the specified file already exists in the root directory of the
storage media on both active MPU and standby MPU.
If neither backup nor main is specified, the startup saved-configuration command specifies the main
next-startup configuration file.
Even though the main and backup next-startup configuration files can be the same one, specify them as
separate files for high availability.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL, but it does not delete the two configuration files.
You can also specify a configuration file as a next startup file when you use the save command to save
the running configuration to it.
Examples
# Specify the main next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....
... Done!
Related commands
display startup