R0106-HP MSR Router Series Fundamentals Command Reference(V7)

169
# Specify cfa0:/all.ipe as the main startup image file for the MPU in slot 0 on an MSR4000 router.
<Sysname> boot-loader file cfa0:/all.ipe slot 0 main
Verifying the IPE file and the images............Done.
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:Y
Add images to target slot.
File cfa0:/boot.bin already exists on slot 0.
File cfa0:/system.bin already exists on slot 0.
Overwrite the existing files? [Y/N]:Y
Decompressing file boot.bin to cfa0:/boot.bin........................Done.
Decompressing file system.bin to cfa0:/system.bin...............................Done.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on slot 0.
Related commands
• boot-loader blade file
• display boot-loader
boot-loader update
Use boot-loader update to synchronize startup images from the active MPU to the standby MPU.
Syntax
boot-loader update { all | slot slot-number }
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Views
User view
Predefined user roles
network-admin
Parameters
all: Upgrades the standby MPU.
slot slot-number: Specifies the slot number of the standby MPU.
Usage guidelines
You can use this command to synchronize startup images after adding an additional MPU.
If any startup software images require a license, register and activate a license for the images on the new
MPU before executing this command. To verify the licensing state of software images, use the display
license feature command .