Manualshelf

R0106-HP MSR Router Series Fundamentals Command Reference(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router
201202203204205206207208209210
200
Device management commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
card-mode
Use card-mode to set the operating mode of an interface card.
Syntax
MSR2000/MSR3000:
card-mode slot slot-number mode-name
MSR4000:
card-mode slot slot-number subslot subslot-number mode-name
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a subcard by its slot number. (On an MSR2000 or MSR3000.)
slot slot-number: Specifies a card by its slot number. (on an MSR4000.)
subslot subslot-number: Specifies a subcard by its subslot number.
mode-name: Specifies an operating mode. This argument might take one of the following values,
depending on the interface card type:
• e: Specifies the E mode, including E1 and E3. If you specify this keyword, all interfaces on the
interface card operate as CPOS E3-E1 interfaces. For more information, see Interface Configuration
Guide.
• t: Specifies the T mode, including T1 and T3. If you specify this keyword, all interfaces on the
interface card operate as CPOS T3-T1 interfaces. For more information, see Interface Configuration
Guide.
• e1: Specifies the E1 mode. If you specify this keyword, all interfaces on the interface card operate
as CPOS E1 interfaces. For more information, see Interface Configuration Guide.
• t1: Specifies the T1 mode. If you specify this keyword, all interfaces on the interface card operate
as CPOS T1 interfaces. For more information, see Interface Configuration Guide.
• e3: Specifies the E3 mode. If you specify this keyword, all interfaces on the interface card operate
as CPOS E3 interfaces. For more information, see Interface Configuration Guide.
• t3: Specifies the T3 mode. If you specify this keyword, all interfaces on the interface card operate
as CPOS T3 interfaces. For more information, see Interface Configuration Guide.
• pos: Specifies the POS mode. If you specify this keyword, all interfaces on the interface card
operate as POS interfaces. For more information, see Interface Configuration Guide.