R0106-HP MSR Router Series Fundamentals Command Reference(V7)

201
• e-cpos: Specifies the E-CPOS mode. If you specify this keyword, all interfaces on the interface card
operate as 2.5 Gbps CPOS interfaces. For more information, see Interface Configuration Guide.
• oc-3: Specifies the OC-3c/STM-1c mode (155 Mbps). If you specify this keyword, all interfaces on
the interface card operate as 155 Mbps CPOS interfaces. For more information, see Interface
Configuration Guide.
• oc-12: Specifies the OC-12c/STM-4c mode (622 Mbps). If you specify this keyword, all interfaces
on the interface card operate as 622 Mbps CPOS interfaces. For more information, see Interface
Configuration Guide.
• ipsec: Specifies the IPsec mode.
• ssl: Specifies the SSL mode.
• atm: Specifies the ATM mode. If you specify this keyword, all interfaces on the interface card
operate as ATM interfaces. For more information, see Interface Configuration Guide.
• auto: Specifies the auto-negotiation mode. If you specify this keyword, the interface card operates
in ATM or EFM mode, depending on the negotiation result.
• efm: Specifies the EFM mode. If you specify this keyword, all interfaces on the interface card
operate as EFM interfaces. For more information, see Interface Configuration Guide.
Usage guidelines
This command takes effect immediately.
Examples
# On an MSR2000 or MSR3000, set the operating mode to E3 for the interface card in slot 2.
<Sysname> system-view
[Sysname] card-mode slot 2 e3
Please reboot or hot-swap the board or card (if supported) to make the configuration take
effect.
# On an MSR4000, set the operating mode to E3 for the subcard in subslot 1 of interface card 2.
<Sysname> system-view
[Sysname] card-mode slot 2 subslot 1 e3
Please reboot or hot-swap the board or card (if supported) to make the configuration take
effect.
# Set the operating mode to EFM for the ATM interface card in slot 0.
<Sysname> system-view
[Sysname] card-mode slot 0 efm
Please reboot or hot-swap the board or card (if supported) to make the configuration take
effect.
clock datetime
Use clock datetime to set the UTC time.
Syntax
clock datetime time date
Views
User view
Predefined user roles
network-admin