R0106-HP MSR Router Series Fundamentals Command Reference(V7)

207
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname>
• When a console user quits user view, the following message appears:
******************************************************************************
* Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
Press ENTER to get started.
# Disable displaying the copyright statement.
<Sysname> system-view
[Sysname] undo copyright-info enable
• When a Telnet user logs in, the user view prompt appears:
<Sysname>
• When a console user quits user view, the following message appears:
User interface con0 is available.
Press ENTER to get started.
display alarm
Use display alarm to display alarm information.
Syntax
display alarm [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies the entire device. The value is always 0. (On an MSR2000 or MSR3000.)
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays the alarm information for all cards. (On an MSR4000.)