R0106-HP MSR Router Series Fundamentals Command Reference(V7)

229
Field Descri
p
tion
Start time
Time to execute the schedule for the first time. If no execution time is specified, this field
is not displayed.
Last execution time
Last time when the schedule was executed. If no execution time is specified, this field is
not displayed. If the schedule has never been executed, "Yet to be executed" is displayed
for this field.
Last completion
time
Last time when the schedule was completed. If no execution time is specified, this field is
not displayed.
Execution counts
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Job name Name of a job under the schedule.
Last execution
status
Result of the most recent execution:
• Successful.
• Failed.
• Waiting—The device is executing the schedule and the job is waiting to be executed.
• In process—The job is being executed.
• -NA-—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and the
execution results, execute the display scheduler logfile command.
display transceiver alarm
Use display transceiver alarm to display transceiver alarms.
Syntax
display transceiver alarm interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the alarms present on every transceiver module.
Usage guidelines
Table 39 shows the common transceiver alarms. If no error occurs, "None" is displayed.
Table 39 Common transceiver alarms
Field Descri
p
tion
GBIC/SFP:
RX loss of signal Received signals are lost.
RX power high The received optical power is high.