R0106-HP MSR Router Series Fundamentals Command Reference(V7)

230
Field Descri
p
tion
RX power low The received optical power is low.
TX fault Transmission error.
TX bias high The transmitted bias current is high.
TX bias low The transmitted bias current is low.
TX power high The transmitted optical power is high.
TX power low The transmitted optical power is low.
Temp high The temperature is high.
Temp low The temperature is low.
Voltage high The voltage is high.
Voltage low The voltage is low.
Transceiver info I/O error Transceiver information read/write error.
Transceiver info checksum error Transceiver information checksum error.
Transceiver type and port configuration
mismatch
The type of the transceiver module does not match the port
configuration.
Transceiver type not supported by port hardware The port does not support this type of transceiver modules.
XFP:
RX loss of signal Received signals are lost.
RX not ready The receiving status is not ready
RX CDR loss of lock Receiving CDR loss of lock.
RX power high The received optical power is high.
RX power low The received optical power is low.
TX not ready The transmission status is ready.
TX fault Transmission error.
TX CDR loss of lock Transmission CDR loss of lock.
TX bias high The transmitted bias current is high.
TX bias low The transmitted bias current is low.
TX power high The transmitted optical power is high.
TX power low The transmitted optical power is low.
Module not ready The module is not ready.
APD supply fault Avalanche photo diode error.
TEC fault Thermoelectric cooler error.
Wavelength unlocked Wavelength loss of lock.
Temp high The temperature is high.
Temp low The temperature is low.
Voltage high The voltage is high.
Voltage low The voltage is low.