R0106-HP MSR Router Series Fundamentals Command Reference(V7)

258
# Configure the device to execute schedule saveconfig at 8:00 a.m. on the last day of every month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 month-date last
# Configure the device to execute schedule saveconfig at 8:00 a.m. every Friday and Saturday.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time repeating at 8:00 week-day fri sat
Related commands
scheduler schedule
transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable alarm traps for transceiver modules.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 Yes
MSR4000 Yes
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Predefined user roles
network-admin
Usage guidelines
If you install a transceiver module that has no vendor name or has a vendor name other than HP, the
system repeatedly outputs traps and logs to notify you to replace the module. To continue to use a
transceiver module that is manufactured or customized by HP but has no vendor information, you can
disable alarm traps so the system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable