R0106-HP MSR Router Series Fundamentals Command Reference(V7)

20
system-view ; mld-snooping (W)
system-view ; vlan * ; mld-snooping * (W)
system-view ; interface * ; mld-snooping * (W)
display mld-snooping * (R)
reset mld-snooping * (W)
debugging mld-snooping * (W)
display debugging mld-snooping * (R)
system-view ; probe * ; debugging system internal mld-snooping * (W)
Feature: stp (STP related commands)
display stp * (R)
system-view ; stp * (W)
system-view ; interface * ; stp * (W)
reset stp * (W)
debugging stp * (W)
display debugging stp * (R)
system-view ; probe ; display system internal stp * (R)
system-view ; probe ; debugging system internal stp * (W)
system-view ; probe ; debugging system internal stg * (W)
…
# Display the feature list of the feature group L3.
<Sysname> display role feature-group name L3
Feature group: L3
Feature: route (Route management related commands)
Feature: usr (Unicast static route related commands)
Feature: ospf (Open Shortest Path First protocol related commands)
Feature: rip (Routing Information Protocol related commands)
Feature: isis (ISIS protocol related commands)
Feature: bgp (Border Gateway Protocol related commands)
Feature: l3vpn (Layer 3 Virtual Private Network related commands)
Feature: mt (multiple-topology related commands)
Feature: route-policy (Routing Policy related commands)
Feature: multicast (Multicast related commands)
Feature: pim (Protocol Independent Multicast related commands)
Feature: igmp (Internet Group Management Protocol related commands)
Feature: mld (Multicast Listener Discovery related commands)
Feature: mcast-domain (Multicast Domain related commands)
Feature: msdp (Multicast Source Discovery Protocol related commands)
Related commands
• feature
• role feature-group
feature
Use feature to add a feature to a feature group.
Use undo feature to remove a feature from a feature group.