R0106-HP MSR Router Series Fundamentals Command Reference(V7)

47
Examples
# Display the Telnet client configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
Related commands
telnet client source
display user-interface
Use display user-interface to display user line information.
Syntax
display user-interface [ number1 | { aux | console | tty | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user line.
The following matrix shows the value ranges for the number1 argument:
Hardware Value ran
g
e
MSR2000 0 to 144
MSR3000 0 to 240
MSR4000 0 to 501
aux: Specifies the AUX line.
console: Specifies the console line.
The following matrix shows the support of MSR routers for the console keyword:
Hardware Ke
y
word com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
tty: Specifies the TTY line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line.