R0106-HP MSR Router Series Fundamentals Command Reference(V7)

48
The following matrix shows the value ranges for the number2 argument:
Hardware Value ran
g
e
MSR2000
aux: 0
tty: 1 to 80
vty: 0 to 63
MSR3000
aux: 0
tty: 1 to 176
vty: 0 to 63
MSR4000
aux: 0 to 2
console: 0 to 2
tty: 1 to 432
vty: 0 to 63
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the display line command. HP recommends that you use the display line
command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type Tx/Rx Modem Auth Int Location
0 CON 0 9600 - N - 0/0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 6 Command output
Field Description
Modem
Whether the modem allows calling in or out. By default, this attribute is not configured and a
hyphen (-) is displayed.
Int
Physical port for the line. If there is no physical port for the line or the line is a console line, a
hyphen (-) is displayed.
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [CON]