R0106-HP MSR Router Series Fundamentals Command Reference(V7)

HP recommends that you use a key sequence as the shortcut key. If you define a single character as the

shortcut key, pressing the key while a command is being executed stops the command. If no command

is being executed, the result depends on the following situations:

• If you are managing the local device, pressing the key enters the character as a common character.

• If you Telnet to another device and manage the remote device, pressing the key does not do

anything.

You can execute this command multiple times, but only the most recent configuration takes effect. To view

the current shortcut key definition, use the display current-configuration command.

This command is available in both user line view and user line class view:

• If the setting in user line view is not the default, the setting in user line view takes effect.

• If the setting in user line view is the default but the setting in user line class view is not, the setting

in user line class view takes effect.

Examples

# Define character a as the shortcut key for terminating a task.

<Sysname> system-view

[Sysname] line console 0

[Sysname-line-console0] escape-key a

To verify the configuration:

1. Ping IP address 192.168.1.49, specifying the -c keyword to set the number of ICMP echo request

packets to 20.

<Sysname> ping -c 20 192.168.1.49

PING 192.168.1.49: 56 data bytes, press a to break

Reply from 192.168.1.49: bytes=56 Sequence=1 ttl=255 time=3 ms

Reply from 192.168.1.49: bytes=56 Sequence=2 ttl=255 time=3 ms

2. Press a.

The task is terminated, and the system returns to user view.

--- 192.168.1.49 ping statistics ---

2 packet(s) transmitted

2 packet(s) received

0.00% packet loss

round-trip min/avg/max = 3/3/3 ms

flow-control

Use flow-control to configure the flow control mode.

Use undo flow-control to restore the default.

Syntax

flow-control { hardware | none | software }

flow-control hardware direction1 [ software direction2 ]

flow-control software direction1 [ hardware direction2 ]

undo flow-control