R0106-HP MSR Router Series Fundamentals Command Reference(V7)

57
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
Default
The idle-timeout interval is 10 minutes.
Views
User line view, user line class view
Predefined user roles
network-admin
Parameters
minutes: Specifies the number of minutes for the idle timeout, in the range of 0 to 35791. The default is
10 minutes.
seconds: Specifies the number of seconds for the idle timeout, in the range of 0 to 59. The default is 0
seconds.
Usage guidelines
The system automatically terminates a user connection if no information interaction occurs on the
connection within the idle-timeout interval.
Setting the idle timeout to 0 disables the idle timeout function.
This command is available in both user line view and user line class view:
• If the setting in user line view is not the default, the setting in user line view takes effect.
• If the setting in user line view is the default but the setting in user line class view is not, the setting
in user line class view takes effect.
Examples
# Set the idle timeout to 1 minute and 30 seconds for user line Console 0.
<Sysname> system-view
[Sysname] line console 0
[Sysname-line-console0] idle-timeout 1 30
ip alias
Use ip alias to associate a Telnet redirect listening port with an IP address.
Use undo ip alias to restore the default.
Syntax
ip alias ip-address port-number
undo ip alias ip-address
Default
A Telnet redirect listening port is not associated with any IP address.
Views
System view