R0106-HP MSR Router Series Fundamentals Command Reference(V7)

69
• If the setting in user line view is not the default, the setting in user line view takes effect.
• If the setting in user line view is the default but the setting in user line class view is not, the setting
in user line class view takes effect.
Examples
# Set the maximum number of lines to be displayed on a screen to 30 for user line Console 0.
<Sysname> system-view
[Sysname] line console 0
[Sysname-line-console0] screen-length 30
Related commands
screen-length disable
send
Use send to send messages to user lines.
Syntax
send { all | number1 | { aux | console | tty | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
all: Specifies all user lines.
number1: Specifies the absolute number of a user line.
The following matrix shows the value ranges for the number1 argument:
Hardware Value ran
g
e
MSR2000 0 to 144
MSR3000 0 to 240
MSR4000 0 to 501
aux: Specifies the AUX line.
console: Specifies the console line.
The following matrix shows the support of MSR routers for the console keyword:
Hardware Ke
y
word com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
tty: Specifies the TTY line.
vty: Specifies the VTY line.