R0106-HP MSR Router Series Fundamentals Command Reference(V7)

73
• 19200 bps.
• 38400 bps.
• 57600 bps.
• 115200 bps.
Usage guidelines
This command is not supported in VTY line view.
The configuration terminal and the device must be configured with the same transmission rate to
communicate.
Examples
# Set the transmission rate to 19200 bps for user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] speed 19200
stopbit-error intolerance
Use stopbit-error intolerance to enable stop bits detection for a user line.
Use undo stopbit-error intolerance to restore the default.
Syntax
stopbit-error intolerance
undo stopbit-error intolerance
Default
Stop bits detection is disabled.
Views
User line view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in VTY line view
Examples
# Enable stop bits detection for user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] stopbit-error intolerance
stopbits
Use stopbits to specify the number of stop bits for a character.
Use undo stopbits to restore the default.
Syntax
stopbits { 1 | 1.5 | 2 }