R0106-HP MSR Router Series Fundamentals Command Reference(V7)

83
Parameters
aux: Specifies the AUX line class view.
console: Specifies the console line class view.
The following matrix shows the support of MSR routers for the console keyword:
Hardware Ke
y
word com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
tty: Specifies the TTY line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
Some login management commands are available in both user line view and user line class view:
• A setting in user line view is applied only to the user line. A setting in user line class view is applied
to all user lines of the class.
• A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line class
view.
• A setting in user line view takes effect immediately and affects the online user. A setting in user line
class view takes effect only for users who log in after the configuration is completed. It does not
affect online users.
This command is an older version reserved for backward compatibility purposes. It has the same function
and output as the line class command. HP recommends you use the line class command.
The following commands are available in user line class view:
• activation-key
• auto-execute command
• authentication-mode
• command accounting
• command authorization
• escape-key
• history-command max-size
• idle-timeout
• protocol inbound
• screen-length
• set authentication password
• shell
• terminal type
• user-role