R0106-HP MSR Router Series Fundamentals Command Reference(V7)

86
FTP commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
FTP is not supported in FIPS mode.
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
FTP server commands
display ftp-server
Use display ftp-server to display FTP server configuration and status information.
Syntax
display ftp-server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running.
User count: 1
Idle-timeout timer (in minutes): 30
Table 9 Command output
Field Descri
p
tion
User count Number of the current logged-in users.
Idle-timeout timer (in minutes)
If no packet is exchanged between the FTP server and client during this
period, the FTP connection is broken.
Related commands
• ftp server enable
• ftp timeout